| Name | Function | |
|---|---|---|
| 1 | Front adjustable feet | When the
projector is set up on a surface such as a desk, turn to extend the
foot to adjust the position of the image.
You can adjust the tilt within a range of ±5°. The front feet are detachable. You can extend the feet by approximately 1.4 inches (35 mm) before they detach. |
| 2 | Safety wire screw hole | Screw hole for securing the ring of the safety wire to prevent the projector from falling from the ceiling or wall. |
| 3 | Rear adjustable feet | When the
projector is set up on a surface such as a desk, turn to extend the
foot to adjust the position of the image.
You can adjust the tilt within a range of ±5°. The rear feet are detachable. You can extend the feet by approximately 1.4 inches (35 mm) before they detach. |
| 4 | Cable cover screw holes | The screw
holes for securing the cable cover.
Make sure the cables have been passed through the notch on the base of the cable cover before attaching the cable cover. |
| 5 | Air intake vent | Takes in air to cool the projector internally. |
| 6 | Security cable attachment point | Pass the theft-prevention wire lock through here and lock it in place. |
| 7 | Ceiling mount attachment points (ELPMB67, 4 points) | Use these points to attach the optional ceiling mount when installing the projector on a wall, or mounting the projector from a ceiling. |