| Name | Description |
|---|---|
| Bonjour | Bonjour is used to search for devices and AirPrint |
| SLP | SLP is used for network searching in EpsonNet Config |
| WSD | Add WSD devices or print from the WSD port |
| LLTD | Displays the product on the Windows network map |
| LLMNR | Use name resolution without NetBIOS even if you cannot use DNS |
| LPR | Print from to the LPR port |
| RAW(Port9100) | Print from the RAW port (Port 9100) |
| IPP | Print over the Internet, including AirPrint |
| FTP | Print over FTP |
| SNMPv1/v2c | Remotely set up and monitor your product |
| SNMPv3 | Remotely set up and monitor your product with the SNMPv3 protocol |
| Setting | Options/Description |
|---|---|
| Use Bonjour | Search for or use devices through Bonjour (you cannot use AirPrint if disabled) |
| Bonjour Name | Displays the Bonjour name |
| Bonjour Service Name | Displays the Bonjour service name |
| Location | Displays the Bonjour location name |
| Top Priority Protocol | Selects the protocol that is the top priority for Bonjour printing |
| Setting | Options/Description |
|---|---|
| Enable WSD | Enable adding devices using WSD, and printing from the
WSD port
Note: If you
do not want this product to search for devices, disable this
setting and disable the Enable
IPP setting. |
| Printing Timeout (sec) | Enter the communication timeout value for WSD printing between 3 and 3,600 seconds |
| Device Name | Displays the WSD device name |
| Location | Displays the WSD location name |
| Setting | Options/Description |
|---|---|
| Allow RAW (Custom Port) Printing | Allow printing from the RAW port (custom port) |
| Port Number | Enter the port number for RAW printing between 1024 and 65535 (except 9100, 1865, and 2968) |
| Printing Timeout (sec) | Enter the timeout value for RAW port (custom port) printing between 0 and 3,600 seconds |
| Setting | Options/Description |
|---|---|
| Enable IPP | Enable IPP communication for products that support IPP are displayed (you cannot use AirPrint if disabled) |
| Allow Non-secure Communication | Allow the printer to communicate without any security measures (IPP) |
| Communication Timeout (sec) | Enter the timeout value for IPP printing between 0 and 3,600 seconds |
| URL(Network) | Displays IPP URLs (http and https) when the product is connected using wired LAN or Wi-Fi (the URL is a combined value of the product’s IP address, Port number, and IPP printer name) |
| URL(Wi-Fi Direct) | Displays IPP URLs (http and https) when the product is connected using Wi-Fi Direct (the URL is a combined value of the product’s IP address, Port number, and IPP printer name) |
| Printer Name | Displays the IPP printer name |
| Location | Displays the IPP location |
| Setting | Options/Description |
|---|---|
| Enable SNMPv1/v2c | Enable SNMPv1/v2c for products that support SNMPv3 |
| Access Authority | Set the access authority when SNMPv1/v2c is enabled to Read Only or Read/Write |
| Community Name (Read Only) | Enter 0 to 32 ASCII characters |
| Community Name (Read/Write) | Enter 0 to 32 ASCII characters |
| Setting | Options/Description |
|---|---|
| Enable SNMPv3 | Enable SNMPv3 for products that support SNMPv3 |
| User Name | Enter 1 to 32 characters |
| Authentication Settings | Select an algorithm and set a password for authentication |
| Encryption Settings | Select an algorithm and set a password for encryption |
| Context Name | Enter 1 to 32 characters in Unicode (UTF-8) |