Network Interface Specifications

Wi-Fi (U.S. and Canada)

Standard IEEE 802.11a/b/g/n*1/ac/k/r/v
Security WPA2-PSK (AES); complies with WPA2 standards with support for WPA/WPA2 Personal

WPA3-SAE (AES)

WPA2/WPA-3-Enterprise

WEP (64/128 bit)

Note: Wi-Fi Direct only supports WPA2-PSK (AES)
Frequency band IEEE 802.11b/g/n: 2.4 GHz

IEEE 802.11a/n/ac: 5 GHz

Channels 2.4 GHz: 1/2/3/4/5/6/7/8/9/10/11/12/13

5 GHz:

Wi-Fi:
  • W52 (36/40/44/48)
  • W53 (52/56/60/64)
  • W56 (100/104/108/112/116/132/136/140/144)
  • W58 (149/153/157/161/165)
Wi-Fi Direct:
  • W52 (36/40/44/48)
  • W58 (149/153/157/161/165)
Connection modes Infrastructure mode

Wi-Fi Direct (Simple AP)

Note: Wi-Fi Direct Simple AP mode is available even if you connect the product to an Ethernet network. Wi-Fi Direct is not supported on IEEE 802.11b.

*1: Only available for the HT20

Ethernet

Standard IEEE802.3i (10BASE-T)*

IEEE802.3u (100BASE-TX)

IEEE802.3ab (1000BASE-T)*

IEEE802.3az (Energy Efficient Ethernet); the connected device should be IEEE802.3az compliant

Communication mode Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps Full duplex, 100Mbps Half duplex
Connector RJ-45

* Use a category 5e or higher STP (Shielded twisted pair) cable to prevent risk of radio interference.

Security

IEEE802.1X; requires the connected device to comply with IEEE802.1X

IPsec/IP Filtering

SSL/TLS; either HTTPS Server/Client or IPPS

SMTPS (StartTLS, SSL/TLS)

SNMPv3

Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use