If the "No Signal" message appears, try the
following solutions:
- Press a source button on the remote to select an
available source. Wait a few seconds for an image to appear.
- Turn on
the connected computer or video source, and press its play button
to begin your presentation, if necessary.
- Check the
connection from the projector to your video sources.
- If you are
projecting from a laptop computer, make sure it is set up to
display on an external monitor.
- If
necessary, turn the projector and the connected computer or video
source off and then on again.
- Try a different video cable.
- If you connected a streaming device, try a different
power cable or use external power.
- If your streaming device is connected to a soundbar
or receiver, make sure you have selected the correct source on your
soundbar or receiver.
- If the other solutions do not solve the problem,
reset all of the projector settings using the options on the
Initial/All Settings menu.