Adjusting the Position of the Image (EF22)

If you are projecting from a table or other flat surface, you can adjust the image position by tilting or moving the projector on the stand.

The larger the angle of tilt, the harder it becomes to focus. Locate the projector so that it only needs to be tilted at a small angle.

1. Turn on the projector and display an image.
2. Adjust the image height by tilting the projector up or down.
   
   
   

   Attention:

   • You can adjust the position from -30 to +120 degrees vertically.
   • Do not tilt the projector up or down beyond its range of movement. Doing so may cause a malfunction.
3. To adjust the horizontal position of the projected image, turn the projector stand left or right as shown below.
   
   
   

   Attention:

   • Turn the projector stand slowly. Turning it with too much force may cause a malfunction.
   • Do not turn the projector stand left or right beyond its range of movement. Doing so may cause a malfunction.
   • Do not turn the projector stand by holding the cables connected to the projector's ports. Doing so may damage the cables or ports.

If the projected image is unevenly rectangular, you need to adjust the image shape.