The
projector automatically corrects the focus and any keystone
distortion of the projected image in the following
situations:
- When you turn on the projector
- When the projector is moved or tilted
Focus and keystone distortion can be automatically corrected
under the following conditions:
- When the size of the projected image (diagonal length) before
correcting the focus and keystone distortion is from 30 to 100
inches
- When the projection distance is about 25 to 87 inches (0.7 to
2.2 m)
- When the installation angle of the projector toward the
projection surface is within 20ยบ right, left, up, or down
Note:
- Focus and keystone distortion are corrected even if the size of
the projected image exceeds 100 inches. However, the adjustment may
fail depending on the installation angle of the projector, the
brightness of the room, and the material of the projection surface.
If necessary, adjust the keystone distortion and focus settings
manually using the projector menu.
- When an image is being projected at an angle and has been
reduced using the Zoom function,
keystone distortion may not be corrected. If the correction fails,
adjust the reduction ratio of the image so that it is closer to
100%.
- Projector > Image Correction > Zoom & Shift > Zoom