When choosing a location to install
the projector and performing the installation, note the precautions
below:
- You must install a ceiling mount when suspending the projector
from a ceiling.
- If you do not install the projector correctly, it could fall
and cause damage or injury.
- Do not use adhesives on the mounting hole to prevent the screws
from loosening, or use lubricants, oils, or similar substances on
the projector; the projector case may crack causing it to fall.
This could cause serious injury to anyone under the ceiling mount
and could damage the projector.
- Do not install the projector in a location subject to high
levels of dust or humidity,or in a location subject to smoke or
steam. Otherwise, it could cause a fire or electric shock to occur.
The projector's case could also deteriorate and be damaged causing
the projector to fall from the mount.
- Examples of environments that could cause the projector
to fall due to case deterioration
- Locations subject to excessive smoke or airborne oil particles,
such as factories or kitchens
- Locations containing volatile solvents or chemicals, such as
factories or laboratories
- Locations where the projector could be subjected to detergents
or chemicals, such as factories or kitchens
- Locations in which aroma oils are often used, such as
relaxation rooms
- Near devices that produce excessive smoke, airborne oil
particles, or foam at events
- Locations near humidifiers
- Do not cover the projector's air intake or air exhaust vents.
If the vents are covered, the internal temperature could rise and
cause a fire.
- Do not use or store the projector in locations where it will be
subject to dust or dirt. Otherwise, the quality of the projected
image may decline, or the air filter may become clogged, resulting
in a malfunction or fire.
- Do not install the projector on an unstable surface or in a
location beyond the weight specifications of the projector.
Otherwise, it could fall or topple causing an accident and
injury.
- When installing the projector in a high position, take measures
to prevent falling by using wires to ensure safety in an emergency,
such as an earthquake, and to prevent accidents. If it is not
installed correctly, it could fall causing an accident and
injury.
- Do not install in locations where salt damage could occur, or
in locations subject to corrosive gas such as sulphuric gas from
hot springs. Otherwise, corrosion could cause the projector to
fall. It could also cause the projector to malfunction.
- When carrying the projector, be sure to hold the stand in both
hands. Otherwise, the projector could fall causing damage or injury
(EF22).