If
the projected image is not evenly rectangular, try the following
steps until the problem is solved.
Note: Focus and keystone distortion of the
projected image are automatically corrected under the following
conditions:
- When the size of the projected image (diagonal length) before
correcting focus and keystone distortion is from 30 to 100
inches.
- When the projection distance is about 28 to 87 inches (0.7 to
2.2 m).
- When the installation angle of the projector toward the
projection surface is within 20ยบ right, left, up, or down.
-
Place the projector directly in front of the center of the
screen, facing it squarely, if possible.
-
Make sure that Auto Keystone
Correction At Startup and Auto
Keystone Correction on Movement are set to On in the Projector menu.
- Projector > Image Correction > Advanced > Auto
Keystone Correction At Startup
- Projector > Image Correction > Advanced > Auto
Keystone Correction on Movement
- Select Auto
Keystone Correction in the Projector menu to automatically adjust the image
shape.
- Projector > Image Correction > Auto Keystone Correction
- When projecting on a screen, use
Fit to Screen to automatically
correct the shape and position of the image so that it fits on your
screen.
- Projector > Image Correction > Fit to Screen
- Adjust the image shape manually using
Manual Keystone Correction in the
Projector menu.
- Projector > Image Correction > Manual Keystone Correction
Note: If you cannot correct the focus and any
distortion of the projected image, turn off the projector and
disconnect the power cord, then reconnect the power cord and turn
the projector back on. If a warning screen is displayed when you
turn on the projector, contact Epson for help.