Fixing Partial Image Problems

If only a partial image is displayed, try the following steps until the problem is solved.

1. Adjust the position of the projected image using the Image Reposition setting in the Projector menu.
   • Projector > Image Correction > Zoom & Shift > Image Reposition
2. Select an appropriate aspect ratio from the Screen menu according to the current input source. (Available only when the current input source is HDMI.)
   • Display & Sound > Screen
3. Make sure you select the correct projection mode. You can select this from the Projection Mode menu.
   • Projector > Advanced Settings > Projection Mode
4. Check your computer display settings to disable dual display and set the resolution within the projector's limits. (See your computer manual for details.)