If you need
to store your product or transport it a long distance, prepare it
for transportation as described here.
Caution: During
transportation and storage, follow these guidelines:
- Because the product is heavy, two or more people should lift and carry it using the hand position shown:
- Avoid tilting the product, positioning it vertically, or turning it upside down; otherwise ink may leak.
- Leave the ink cartridges installed. Removing the cartridges can dry out the print head and may prevent the product from printing.
- Leave the maintenance box installed; otherwise ink may leak.
Note: Before
storing your product for a long period, replace low, expended, or
expired ink to help prevent the print head from drying out. Store
your product in a cool, dry place.
- Turn off the product.
- Wait for the
power light to turn off, then
unplug the power cord. - Remove all the paper from the product.
- Disconnect any connected cables.
- Close the rear paper support and remove the output
tray.
Note: Do not place the output tray on top of the product. The output tray can fall while the product is being moved and you can be injured.
- Remove the optional
cabinet and paper cassettes (if they are installed) before lifting
the product.
Note: If the optional cabinet is installed, you can use the casters on the cabinet to roll the product instead of lifting it. Remove the cabinet stands and unlock the casters before moving the product. Do not roll the product over uneven or rough surfaces to avoid harsh impacts to the product.
- Place the product in its original packing materials, if possible, or use equivalent materials with cushioning around the product. Make sure the box adequately protects the product control panel.