Saving Settings to a USB Flash Drive

You can save the projector settings you want to transfer to a USB flash drive.

Note: Use an empty flash drive. If the drive contains other files, the transfer may not complete correctly. The flash drive must use the FAT 32 format and cannot have any security features. Delete any files on the drive before using it for batch setup or the settings may not be saved correctly.

Turn off the projector and unplug the power cord from the projector's power inlet.
Insert the flash drive into the USB-A port.
Note: Connect the flash drive directly to the projector. Do not use a hub or your settings may not be saved correctly.
Press and hold the Esc button on the control panel or remote control as you connect the power cord to the projector's power inlet.
When all of the projector lights (except the filter light) turn on, release the Esc button.
The lights flash to indicate that settings are transferring to the flash drive. When the lights stop flashing, the projector turns off.
Caution:

Do not unplug the power cord or remove the flash drive while the lights are flashing. This could damage the projector.
Remove the flash drive.
Note: The file name for the batch setup file is PJCONFDATA.bin. If you need to change the file name, add text after PJCONFDATA using only alphanumeric characters. If you change the PJCONFDATA section of the file name, the projector may not be able to recognize the file correctly.