Creating a Playlist Using Epson Web Control

You can create playlists using a web browser and save them to a USB flash drive connected to a projector on a network when the projector is in Content Playback mode.

Caution: Do not remove the USB flash drive from the projector or disconnect the projector's power cord while creating playlists. Data saved on the USB flash drive may be damaged.

Make sure the projector is in Content Playback mode.
Make sure your computer or device is connected to the same network as the projector.
Connect a USB device to the projector's USB-A port.
Start your web browser on your computer or device.
Enter the projector's IP address into the browser's address box and press the computer's Enter key.
Note: When entering an IPv6 address, wrap the address with [ and ].
You see the Epson Web Control screen.
Select USB Memory Device.
Select Upload New Data.
Select the images or movies you want to add to the playlist.
Note: You cannot upload .mp4 or .mov files. If you want to add .mp4 or .mov files to the playlist, use Epson Projector Content Manager software or the Epson Creative Projection app.
The selected files are copied to the USB device that is connected to the projector.
Do one of the following:
- Select Create New Playlist to create a new playlist and add the files to it.
- Select Add to Playlist and select the existing playlist you want to add the files to.
Edit the playlist.
Select Finish when you are done editing the playlist.

You can play the playlist from the Remote or Playlist screen. If you want to specify when the playlist starts and finishes, schedule the playlist using the Epson Projector Content Manager software. See the Epson Projector Content Manager Operation Guide for details.