Updating Projector Firmware Using a USB Storage Device

You can update the projector's firmware using a USB storage device.
  1. Download the projector firmware file from the Epson support website. Make sure it is the correct firmware file for your model.
    Note:  If the firmware file is not the correct file for your model, or if you renamed the file, the update will not start.
  2. Copy the downloaded firmware file onto the root (top) folder of the USB storage device.
    Note: Do not rename the firmware file. The USB device should be completely empty except for the firmware file and should be formatted in FAT format.
  3. Turn on the projector.
  4. Connect the USB storage device to the projector's USB-A port.
  5. Press the Menu button, select the Information menu, and press Enter.
  6. Select Firmware Update and press Enter.
  7. Select Yes to start the firmware update.
    Note: Do not disconnect the power cable or remove the USB storage device while the firmware is updating.
While the firmware is updating, all of the status indicators on the projector start flashing. After the update is complete, the projector enters standby mode. If the Direct Power On setting is enabled, the projector restarts automatically.
Note: If all of the status indicators flash rapidly, the firmware update may have failed. Disconnect and reconnect the projector's power cord. If the indicators continue to flash even after reconnecting the power cord, unplug the cord from the electrical outlet and contact Epson Support.

After the update is complete, check the Version setting in the Information menu to confirm that the firmware was updated successfully.

Parent topic: Updating the Firmware
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use