You can display information about the projector and input sources by viewing the Info menu. However, you cannot change any settings in the menu.
| Setting | Options | Description |
|---|---|---|
| Projector Info | Operation Hours
Source Input Signal Resolution Refresh Rate Sync Info Color Format Status Serial Number Lens Type Event ID |
Displays the projector's information
Operation Hours: displays the number of hours (H) the projector has been used since it was turned on. The cumulative use time is displayed as "0H" for the first 10 hours. When exceeding 10 hours, it is displayed as "10H" and "11H" in 1 hour units. Source: displays the name of the port to which the current input source is connected Input Signal: displays the input signal setting of the current input source Resolution: displays the resolution of the current input source Refresh Rate: displays the refresh rate of the current input source Sync Info: displays information about video signals that may be needed by a service technician Color Format: displays the color format of the current input source Status: displays information about projector problems that may be needed by a service technician Serial Number: displays the projector's serial number Lens Type: displays the model number of the installed lens Event ID: displays the Event ID number corresponding to a network problem; see the list of Event ID codes |
| Light Source Info | Light Source Hours | Displays the projector's light source information
Select Light Source Hours to display the number of operating hours |
| Version | — | Displays the projector's firmware information |
| Status Information | Status Information
Source Signal Information Network Wired Maintenance Version |
Displays the projector's basic status information
Status Information: displays the projector's operating status Source: displays the input signal information Signal Information: displays the input digital signal information Network Wired: displays the wired LAN settings Maintenance: displays the operating time for the projector and light source Version: displays the projector's firmware version |
| Voltage Warning Info | — | Displays various voltage warnings
Select Detail when a warning or error is displayed to check detailed logs for before and after the error was detected |
| Power On/Off History | — | Lets you view the power on/off logs |
| Firmware Update | — | Performs a firmware update of the projector |
| Export Batch Settings | — | Exports the projector's menu settings to a USB flash drive or a computer, allowing you to copy them to other projectors of the same model |
| Import Batch Settings | — | Imports the menu settings saved to a USB flash drive or a computer |