Reset Menu

Settings on the Reset menu let you reset certain projector settings to their default values.

Setting	Options	Description
Reset All Memories	—	Deletes all memories saved in Memory, Lens Position, and Geometry Correction
Refresh Mode	Timer Messages Start	Clears any projected afterimage and turns off the projector after a specified period of time Timer: lets you set a time period during which the projector displays the refresh image Messages: set to On to display a message informing you that the projector is in refresh mode Start: starts the refresh mode process to clear any projected afterimage and turn off the projector after a specified period of time. Press any button on the remote control to cancel this process.
Light Source Calibration	Run Now Run Periodically Last Run	Optimizes the color balance of the projected image Run Now: starts light source calibration to optimize the color balance of the currently projected image. You may not be able to start calibration if the projector's environmental temperature is out of range. (Wait 20 minutes after turning on the projector before starting calibration for the best results.) Light Source Calibration does not start in the following cases: If the projector is not used continuously for more than 20 minutes If the surrounding temperature gets too high, and the brightness has been automatically dimmed If you use the following functions and the brightness of the light source declines to a specific level or lower: Dynamic Contrast Lights-Out Control A/V Mute If Light Output is set to 30% or less Run Periodically: starts Light Source Calibration after every 100 hours of use Last Run: displays the date and time of the last light source calibration
Reset All Config	—	Resets most of the projector settings to their default values

You cannot reset the following settings using the Reset All Config option:

Memory
Panel Alignment
Color Uniformity
User's Logo
Date & Time
Color Matching
Language
Network menu items