- Press the Menu button.
- Select the Network menu
and press
Enter. - Select Network
Configuration and press Enter.
- Select the Others menu
and press Enter.
- If you want to use the Secure HTTP protocol to encrypt communication when using Web Control, turn on the Secure HTTP setting and import the web server certificate using the Web Server Cert. setting.
- If you want to operate the projector using Web API, turn on the Web API setting. The username for API authentication is EPSONWEB; use the password that is set for the Web Control Password.
- If you want to monitor the projector using PJLink, turn on the PJLink setting.
- Turn on the PJLink Notification setting to enable the PJLink notification function when the PJLink setting is enabled.
- If your network environment uses an AMX controller, turn on the AMX Device Discovery setting to allow the projector to be detected.
- If your network environment uses a Crestron Connected controller, turn on the Crestron Connected setting to allow the projector to be detected.
- If your network environment uses Crestron Xio Cloud, turn on the Crestron Xio Cloud setting.
- If your network environment uses a Control4 or Control4 SDDP controller, turn on the Control4 SDDP setting to allow the projector to be detected.
- When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus.
