| Name | Function | |
|---|---|---|
| 1 | Front adjustable feet | When the
projector is set up on a surface such as a desk, turn to extend the
foot to adjust the position of the image.
You can adjust the position of the image by tilting the projector up to 10°. The larger the angle of tilt, the harder it becomes to focus. |
| 2 | Safety wire screw holes | Screw hole for securing the ring of the safety wire to prevent the projector from falling from the ceiling or wall. |
| 3 | Rear adjustable feet | When the
projector is set up on a surface such as a desk, turn to extend and
retract the feet to adjust the horizontal tilt.
You can adjust the tilt within a range of ±1.5°. The rear feet are detachable. You can extend the feet by approximately 0.47 in (12 mm) before they detach. |
| 4 | Ceiling mount attachment points | Use these points to attach the optional ceiling mount when installing the projector on a wall, or mounting the projector from a ceiling. |
| 5 | Cable cover screw holes | The screw holes
for securing the cable cover in place.
Make sure the cables have been passed through the notch on the base of the cable cover before attaching the cable cover. |
| 6 | Lens replacement cover screw holes | The screw holes for securing the lens replacement cover in place. |
| 7 | Air intake vent | Takes in air to cool the projector internally. |