Attaching and Removing the Vanity Board

You can attach the vanity board that came with your projector to cover the top of the projector.
  1. Turn off the projector and unplug the power cord.
  2. Align the tabs on the vanity board with the guides on the projector, place the vanity board on the projector , and then slide it backward until it fits in place.


  3. Tighten the screws.


  4. Attach one end of the vanity board fall prevention wire to the vanity board.


  5. Remove the protective sheet from the vanity board.

When removing the vanity board, remove the screw for the vanity board fall prevention wire, and then remove the wire from the projector.

Parent topic: Setting Up the Projector
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use