If the projected image is not evenly rectangular,
try the following solutions:
- Place the
projector directly in front of the center of the screen, facing it
squarely, if possible.
- If you are mounting the projector from the ceiling,
use the adjustment controls on the mount at the time of
installation.
- Adjust the
image shape using the Geometry
Correction menu settings.
- Adjust the H/V-Keystone setting to correct the image
shape.
- Adjust the
Quick Corner setting to correct
the image shape.
- Adjust the Curved
Surface setting to adjust the corners and sides of an image
projected on a curved surface.
- Adjust the Corner
Wall setting to correct the image shape projected on a
curved surface with right angles.
- Adjust the Point
Correction setting to correct slight distortion that affects
a portion of the screen.
- If the projected image is bowed in the middle or the
sides, then the projection surface is not flat. This type of
distortion cannot be corrected from the projector's settings.