If the printed image is not positioned correctly on your media,
try these solutions:
- Make sure
you loaded the media correctly and selected the correct margin and
start positions for it on the product control panel.
- Turn on the Detect Paper Skew
and Width Detection settings on the
product control panel to prevent your image from printing outside
the printable area.
- If the media is not loaded correctly, the media may skew and
the print position may be affected. Be careful of the following,
and load the media correctly:
- When pulling out the media, hold the center of the media in one
hand, and pull it straight out.
- When you attach the end of the media to the roll core, pull the
center section of the media straight down as you affix it.