To keep your
product working at its best, you should clean it several times a
year.
Caution:
Do not use a hard brush, alcohol, or
paint thinner to clean the product or you may damage it. Do not use
oil or other lubricants inside the product or let water get inside
it. Do not touch the flat white cable, translucent film, or ink
tubes inside the product.
- Turn off the product.
- Clean the outer case and control panel with a soft, clean cloth moistened with a little water. If you cannot remove the dirt, try cleaning with a soft cloth moistened with a mild detergent.
- Open the ADF cover.
- Use a soft, moistened, lint-free cloth (microfiber is recommended) to clean the rollers and the interior of the ADF.
- Open the document cover.
- Clean the scanner glass
with a soft, lint-free cloth (microfiber is recommended) moistened
with a little glass cleaner.
Caution:Do not spray glass cleaner directly on the glass and do not press the glass surface with any force. Be careful not to scratch or damage the surface of the glass.
- Release both tabs and remove the document mat.
- Clean the parts shown in the illustrations.
- Clean the glass surface
with a soft, lint-free cloth (microfiber is recommended) moistened
with a little glass cleaner.
Do not spray glass cleaner directly on the glass and do not press the glass surface with any force. Be careful not to scratch or damage the surface of the glass.
- Reattach the document mat.
- Close the document cover.
- Close the ADF cover until it clicks.
