| The ! error light is on and the ready
light is flashing |
A paper jam or a double feed has occurred.
Remove any paper loaded in the input tray. If the light continues
to flash, a scanner error may have occurred. Turn the scanner off
and then back on again. If the error continues, contact Epson for
support. |
| The scanner cover is open. Make sure the
scanner cover is closed and there is no jammed paper inside. |
| The following lights are flashing separately
or simultaneously:
|
A fatal error has occurred while using the
scanner with a USB cable. Try the following:
- Check the
scanner connection to your computer to make sure it is secure.
- Turn the
scanner off and then back on again. If the error continues, the
scanner may be malfunctioning. Contact Epson for support.
|
The following lights are flashing separately
or simultaneously:
- ready
- ! error
 Wi-Fi (ES-300W) |
A fatal error has occurred while using the
scanner with Wi-Fi (ES-300W). Turn the scanner off and then back on
again. If the error continues, the scanner may be malfunctioning.
Contact Epson for support. |
The ready light is off and any of the
following lights are on:
- ! error
 automatic feeding mode
- Wi-Fi (ES-300W)
|
The firmware update has failed and the scanner
is in recovery mode. Try updating the firmware again. |
The following lights are flashing separately
or simultaneously: (ES-300W)
- ! error
- Wi-Fi
|
An access point settings error (security
error) has occurred. Press the  stop button to clear the
error, restart the devices you want to connect to the network, then
reconnect to the network. |
The  battery
light is flashing orange quickly (ES-300W) |
The battery is too hot, damaged, or at the end
of its service life and, therefore, unable to charge. Charge the
battery within an ambient temperature range of 46 to 95 °F (8 to 35
°C). If the error continues, the scanner may be malfunctioning.
Contact Epson for support. |
