Cleaning the Product

To keep the product working at its best, you should clean it several times a year.
Caution:
Do not use a hard brush, benzine, alcohol, or paint thinner to clean the product or you may damage it. Do not place anything on top of the cover or use the cover as a writing surface, or it could get permanently scratched. Do not use oil or other lubricants inside the product or let water get inside.
  1. Turn off the product.
  2. Unplug the power cable.
  3. Disconnect any connected cables.
  4. Remove any paper from the product.
  5. Clean the sheet feeder and paper support using a soft brush or a soft, lint-free cloth (microfiber is recommended).
  6. Clean the outer case with a soft cloth dampened with a mild detergent.
  7. Plug the power cable back in, and turn on the product.
  8. Clean the paper path, if necessary.
Note: Close the paper support and the output tray when you are not using the product to protect it from dust.
Parent topic: Cleaning and Transporting the Product
Related tasks
Cleaning the Paper Path