If your printouts are blurry or smeared, try these
solutions:
- Make sure
your paper is not damp, curled, old, or loaded facedown in the
sheet feeder (the printable side should be faceup).
- Use a
support sheet with special paper, or load special paper one sheet
at a time.
- Make sure
your paper meets the specifications for your product.
- Use EPSON
papers to ensure proper saturation and absorption of genuine EPSON
inks.
- Make sure
the paper type setting in your product software matches the type of
paper you loaded.
- Remove each
sheet from the output tray as it is printed.
- Avoid
handling printouts on glossy paper right after printing to allow
the ink to set.
- Turn off any
high speed settings in your product software.
- If you print
on both sides of a sheet of paper, smudges may appear on the
reverse side of heavily saturated or dark images. If one side of a
sheet will contain a lighter image or text, print that side
first.
- Run a nozzle
check to see if any of the print head nozzles are clogged. Then
clean the print head, if necessary.
- Align the
print head.
- Clean the
paper path.
Note: Your product
will not operate properly while tilted at an angle. Place it on a
flat, stable surface that extends beyond the base of the product in
all directions.