If your product does not appear in the Mac OS X printer window,
try these solutions:
- Turn your
product off, wait 30 seconds, then turn it back on again.
- If you are
connecting the product via Wi-Fi Protected Setup (WPS) and the
WiFi light on your product is not solid green, make
sure you press the Wi-Fi button on the product within 2
minutes of pressing the WPS button on your router. Hold down the
Wi-Fi button on the
product for 3 seconds.
- If you are
connecting the product via EpsonNet Setup and the WiFi
light on your product is not solid green, make sure your product
software was installed correctly. If necessary, reinstall your
software.