Splitting the Screen

You can split the screen and project from two sources at the same time. You can annotate and interact with both sources.

Note: Whiteboard mode is not available when the screen is split, and the following combinations of sources are not supported:

Press the Split button on the remote control or select the Split tool on the bottom annotation toolbar. The current image is reduced and appears on one side of the projection surface.
Press the Menu button on the remote control. You see a screen like the following:
Select Source and press the Enter button. You see a screen like the following:
Select the source you want to use for the right half of the screen. If you want to write on a blank screen, select any unused source.
Select Execute, then press the Enter button.
Do any of the following as necessary:
- To change to a different source at any time, press the Menu button on the remote control, select Source, then select the source you want.
- To annotate on the right screen, press the Menu button on the remote control, select Target Pen Mode, then select Screen Right. Set the Pen Mode setting to PC Free Annotation.
- To use computer interactive mode on the right screen, press the Menu button on the remote control, select Target Pen Mode, then select Screen Right. Set the Pen Mode setting to PC Interactive.
- To reverse the left and right images, press the Menu button on the remote control and select Swap Screens.
- To make one image larger, press the Menu button on the remote control, select Screen Size, then select Larger Left or Larger Right.
Note: When you select LAN as the source for one of the screens, you cannot change the Pen Mode setting.
To return to displaying one image, press the Esc button on the remote control.

Note: The following operations cannot be performed during split screen projection: