Setting Up Projector Network E-Mail Alerts

You can set up the projector to send you an e-mail alert over the network if there is a problem with the projector.
  1. Press the Menu button.
  2. Select the Network menu and press Enter.
  3. Select Network Configuration and press Enter.
  4. Select the Mail menu and press Enter.

  5. Turn on Mail Notification.
  6. Enter the IP address for the SMTP Server option.
    Note: Do not use these addresses: 127.x.x.x or through (where x is a number from 0 to 255).
  7. Select a number for the SMTP server Port Number, from 1 to 65535 (default is 25).
  8. Choose an Address field, enter the e-mail address, and select the alerts you want to receive there. Repeat for up to three addresses.
    Note: Your e-mail address can be up to 32 alphanumeric characters long.
  9. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus.
Note: If a critical problem causes a projector to shut down, you may not receive an e-mail alert.