User's Guide

Index	Help	Safety

Contents

Problem Solver

Initializing the Network Interface

To initialize your network interface, turn on the device. Then, while both the status light and the data light are off, hold down the status sheet button of the network interface for twenty seconds. The length of time necessary to hold down the status sheet button varies depending on the device model. The green light flashes and the green data light turns on, indicating the network interface is being initialized.

After the initialization is complete, press the status sheet button to print a status sheet. Check the information on the status sheet.

Note:

You can also initialize the network interface using EpsonNet Config by clicking the Default Settings button.

[Top]