User's Guide

Index
Help
Safety
Contents
Glossary

Maintenance / Replacing Consumable Products

Replacement Messages

When you see the following messages in the LCD panel or the window of EPSON Status Monitor 3, replace the appropriate consumable products. You can continue to print for a short time after a message appears, but Epson recommends early replacement to maintain print quality and extend the life of your product.

LCD Panel Message

Description

Worn Photoconductor

The photoconductor unit is near the end of its service life. Replace the photoconductor unit with a new one.

Worn Fuser

The fuser unit has reached the end of its service life. Contact your dealer.

Worn uuuu Dev Unit

The developer unit has reached the end of its service life. Contact your dealer. (The letters C, M, Y, and K appear in place of uuuu and indicate the colors Cyan, Magenta, Yellow, and Black respectively.)

uuuu Toner Low

The toner cartridge for the indicated color is near the end of its service life. Prepare a new toner cartridge. (The letters C, M, Y, and K appear in place of uuuu and indicate the colors Cyan, Magenta, Yellow, and Black respectively.)

Note:
To clear the warning, click the  Setup button on the control panel, select Reset Menu from Printer Settings, then select Clear All Warning.

If a consumable product reaches the end of its service life, the product stops printing and displays the following messages in the LCD panel or the window of EPSON Status Monitor 3. When this happens, the product cannot resume printing until you replace the depleted consumable products.

LCD Panel Message

Description

Replace Toner uuuu*

The indicated toner cartridge is empty.

Replace Photoconductor

The photoconductor unit comes to the end of its service life. Even if this message is displayed in the LCD panel, you can continue to print for a short time by pressing the  B&W Start or  Color Start button on the control panel. The message in the LCD panel changes from Replace Photoconductor to Worn Photoconductor.

*  The letters C, M, Y, and K appear in this position, indicating the color of the toner to be replaced. For example, the message Y Toner Low means that the amount of toner remaining in the yellow toner cartridge is low.

Note:
  • Messages appear for one consumable product at a time. After replacing a consumable product, check the LCD panel for replacement messages for other consumable products.
  • Print quality cannot be guaranteed when printing with a worn consumable product. If print quality is not what you expected, replace the consumable product.
  • The product stops printing if printing with a worn consumable product might damage the product. If the product stops printing, replace the consumable product.


[Top]


Next
Version 1.00E, Copyright © 2003, SEIKO EPSON CORPORATION