Instructions on Using a Dial-Up Router

If DHCP is used to assign an IP address for the printer and the Dynamic DNS function is not supported, you need to change the printer port setting every time you turn on the printer. Therefore, we recommend that you set a valid IP address for the network interface by using one of the following methods.

• Set the IP address for the network interface manually. Use EpsonNet Config. See the EpsonNet Config Reference Guide for details.

• Specify the network interface by selecting the DHCP function.

• Set the assigned address from the DHCP function.

Note:

Use NetBEUI printing if you do not want to go through these steps. See the manual of the Dial-Up router for more information on scorp range, bind, exclusive address of the DHCP function.