Connecting the Label Printer to Your Mobile Device

Follow the instructions in these sections to connect the printer to your mobile device.

Enabling Bluetooth Discovery Mode

Check that Bluetooth is enabled on the printer before connecting.

The  Bluetooth light pulses when Bluetooth is enabled.


If Bluetooth is disabled, enable it by following the steps below:

  1. Press the  power button to turn off the printer.
  2. Press the  power button and the Bluetooth button at the same time.


    The printer powers on and the  Bluetooth light pulses.
  3. Pair your device to the printer using the instructions for your device's operating system.

Connecting the Printer to Your Android Device

You can connect the label printer to your Android device using Bluetooth.
  1. Turn on your mobile device.
  2. Go to Settings > Wireless & Network and turn on Bluetooth.
  3. Wait while your device scans for the printer. The printer is displayed when your device finds it.
  4. Tap the printer. Pairing is complete when the printer is listed in the paired devices list.
    Note: The Bluetooth icon in the status bar on your device does not change after pairing is complete, nor does the connection status display on the Bluetooth settings screen.
  5. Open iLabel.
  6. Tap the icon.
  7. Tap Printer.
  8. Tap LW-600P.
The printer is ready to use when you see this icon on the main screen of iLabel:


Connecting the Printer to Your iOS Device

You can connect the label printer to your iOS device using Bluetooth.
  1. Turn on your mobile device.
  2. Go to Settings > Bluetooth and turn on Bluetooth.
  3. Wait while your device scans for the printer. The printer is displayed under Devices when the printer is found.
  4. Tap the printer.
Pairing is complete when the Bluetooth light on the printer is lit (not flashing).