Make sure
you have new ink bottles handy and have read the ink safety
precautions before you begin.
You can continue to use the product even if one or more ink
tanks are not filled all the way. However, to keep your product
operating at its best, fill all the ink tanks up to the top
line.
Caution:
Wear plastic gloves while refilling the ink
tanks to avoid staining your hands.
Place a
sheet of paper under the ink tank area in case of
spills.
Turn on
your product.
Make
sure the power light is on, but not
flashing.
Unhook
the ink tank unit from the product and lay it down.
Note: Do not pull
on the ink tubes.
Open the
ink tank unit cover, then remove the ink tank’s cap.
Note: Make sure
the color of the ink tank matches the ink color you want to refill,
and only remove the cap from that ink tank. Be careful not to spill
any ink.
Snap off
the tip of the bottle cap, but do not dispose of the bottle cap tip
so you can use it to seal the bottle cap later, if necessary. Then
remove the cap, remove the seal from the bottle, and replace the
cap on the bottle.
Note: Make sure
the color of the ink bottle matches the ink color you want to
refill.
Caution:
Install the bottle cap tightly; otherwise, ink
may leak.
Refill
the ink tank with the correct color ink up to the upper line on the
ink tank.
If any
ink remains in the ink bottle after filling the ink tank, place the
bottle cap tip securely on the bottle cap and store the ink bottle
upright for later use.
Place
the rubber cap securely on the ink tank.
Repeat
the previous steps as necessary for each ink color you need to
refill.