Cannot Scan Over a Network

If you cannot start Epson Scan for scanning over a network, try these solutions:

• If you are scanning a large original at a high resolution, a network communication error may occur. Try scanning again at a lower resolution.
• If network communication was interrupted while starting Epson Scan, exit Epson Scan, wait a few seconds, and restart it. If Epson Scan cannot restart, turn off your product, turn it back on, and try restarting Epson Scan again.
• Check the connection setting and test the connection using Epson Scan Settings:

  Windows: Click or Start > All Programs or Programs > EPSON > EPSON Scan > EPSON Scan Settings. Make sure the Connection setting is set to Network, then click the Test button.

  Mac OS X: Open the Applications folder, click Epson Software, and click EPSON Scan Settings. Make sure the Connection setting is set to Network, then click the Test button.

• Make sure the option selected as the Timeout Setting in the Epson Scan Settings program is long enough to complete scanning over a network.
• You may need to disable the firewall and any anti-virus software on your wireless router or access point.