Cannot Scan Over a Network

If you cannot start Epson Scan for scanning over a network, try these solutions:

• If you cannot scan from your product control panel, make sure you restarted your computer after installing the product software. Make sure the Event Manager program is not being blocked by your firewall or security software.
• If you are scanning a large original at a high resolution, a network communication error may occur. Try scanning again at a lower resolution.
• If network communication was interrupted while starting Epson Scan, exit Epson Scan, wait a few seconds, and restart it. If Epson Scan cannot restart, turn off your product, turn it back on, and try restarting Epson Scan again.
• Check the connection setting and test the connection using Epson Scan Settings:

  Windows 8: Navigate to the Start screen and select EPSON Scan Settings. Make sure the Connection setting is set to Network, then click the Test button.

  Windows (other versions): Click or Start > All Programs or Programs > EPSON > EPSON Scan > EPSON Scan Settings. Make sure the Connection setting is set to Network, then click the Test button.

  Mac OS X: Open the Applications folder, click Epson Software, and click EPSON Scan Settings. Make sure the Connection setting is set to Network, then click the Test button.

• Make sure the option selected as the Timeout Setting in the Epson Scan Settings program is long enough to complete scanning over a network.
• You may need to disable the firewall and any anti-virus software on your wireless router or access point.