Product Light Status

You can often diagnose problems with your product by checking its lights.



Note: The control panel layout varies by product.
Lights
1  power
2 WiFi (M105) or Ethernet (M100)
3  paper
4  ink
Light status Condition/solution
The  power light is on The product is turned on.
The  power light is flashing The product is busy. Wait for the  power light to stop flashing before turning off the product.
The  power light is flashing

The WiFi light is flashing orange (M105)

A wireless connection error has occurred (M105). Press the Wi-Fi button to try connecting again.
The  power light is flashing

The  paper light is flashing

Paper is jammed in the product. Remove the jammed paper, and press the  cancel button to clear the error.
The  power light is flashing

The  paper light is on

No paper is loaded or multiple sheets fed at one time. Load paper in the product, and press the  cancel button to clear the error.
The  power light is on or flashing

The  ink light is flashing

The  paper light is flashing

The ink pads are near the end of their service life. Contact Epson for support. (To continue printing, press the  cancel button.)
The  ink light is on

The  paper light is on

An error has occurred during firmware updating. Connect your product using a USB cable and try updating the firmware again. If the error message continues, contact Epson for support.
The  power light is flashing

The  paper light is flashing

The  ink light is flashing

A general printer error has occurred. Turn the product off and then back on again. If the error continues, check for a paper jam. If the error persists, contact Epson for support.
Related references
Paper Feeding Problems
Paper Jam Problems
Paper Ejection Problems