Check the Lights on Your Product

Light status	Problem and solution
On light on	The Epson Stylus NX110 Series is turned on.
On light slowly flashing No other lights are on	The Epson Stylus NX110 Series is in sleep mode. Press any button except the  On button to wake it up.
paper light on	Paper is out or multiple pages have fed. Load or reload paper in the sheet feeder.
paper light and  On light flashing at same rate	Paper is jammed. Carefully remove the jam.
ink light flashing	One or more cartridges have low ink. You can continue printing until a cartridge needs replacement. Check the cartridge status to determine which cartridges are affected.
ink light on	An ink cartridge is expended, incorrectly installed, or cannot be used with the printer. If an ink cartridge is likely to be expended or is not compatible, you must replace the cartridge to be able to print. If you just replaced a cartridge and the light is still on, the cartridge is not installed correctly. Press the  Stop button to move the cartridges to the replacement position. Press down on all the installed cartridges, then press the  Stop button to continue.
All the lights are on	Parts inside the Epson Stylus NX110 Series are at the end of their service life. Contact Epson for help.
All the lights are flashing	There is a problem with the Epson Stylus NX110 Series. Turn it off, wait a few moments, and turn it back on again. If the error is not resolved, contact Epson for help.