You can use the Epson Stylus NX620/625 Series to transfer files between your memory card and computer. Before you transfer files, make sure you installed the software that came with your Epson Stylus NX620/625 Series and connected it to your computer or network. See the Start Here sheet for instructions.
Note:
If you are going to transfer files from your computer to your memory card, make sure the write protect switch on your memory card is set to allow writing to the card.
If you are going to transfer files from your computer to your memory card, make sure the write protect switch on your memory card is set to allow writing to the card.
Caution:
If you are using the Epson Stylus NX620/625 Series on a network, remove the memory card before you change any network settings related to your printer; otherwise you may lose photos or files on the card.
If you are using the Epson Stylus NX620/625 Series on a network, remove the memory card before you change any network settings related to your printer; otherwise you may lose photos or files on the card.
|
1.
|
Insert a memory card in the memory card slot.
|
Windows:
Click
or Start, then click My Computer or Computer. Double-click the removable disk icon for the memory card.
Click
or Start, then click My Computer or Computer. Double-click the removable disk icon for the memory card.Macintosh:
If your Epson Stylus NX620/625 Series is connected to your computer with a USB cable, double-click the removable disk icon for the memory card and continue with step 3.
If your Epson Stylus NX620/625 Series is connected to your computer with a USB cable, double-click the removable disk icon for the memory card and continue with step 3.
If you installed the Epson Stylus NX620/625 Series on a network, do one of the following:
Mac OS X 10.5/10.6:
Double-click the hard drive icon on your desktop (Mac OS® X 10.5) or select Computer from the Go menu (Mac OS X 10.6), click Epson Stylus NX620 in the Shared section of the sidebar (you may need to widen the sidebar to see the name), then double-click the MEMORYCARD icon.
Double-click the hard drive icon on your desktop (Mac OS® X 10.5) or select Computer from the Go menu (Mac OS X 10.6), click Epson Stylus NX620 in the Shared section of the sidebar (you may need to widen the sidebar to see the name), then double-click the MEMORYCARD icon.
Mac OS X 10.4:
Double-click the hard drive icon on your desktop, click Network in the sidebar, then double-click your Epson product (it may be located within a folder with your network's name) and click OK. Double-click the MEMORYCARD icon that appears on your desktop.
Double-click the hard drive icon on your desktop, click Network in the sidebar, then double-click your Epson product (it may be located within a folder with your network's name) and click OK. Double-click the MEMORYCARD icon that appears on your desktop.
|
3.
|
A folder opens on your computer, showing the contents of your memory card. Now you can transfer your photos:
|
|
•
|
To transfer photos to your computer, select them in your memory card folder and drag them to the desired location on your computer, such as the desktop or a folder.
|
|
•
|
To transfer photos from your computer to the memory card, select the photos on your computer and drag them to the memory card folder.
|
|
4.
|
Before you remove the memory card or turn off the Epson Stylus NX620/625 Series, make sure the memory card access light is not flashing. If your Epson Stylus NX620/625 Series is connected to your computer by a USB cable, prepare the card for removal (not necessary when accessing the memory card over a network).
|