Connecting to a Component-to-VGA Video Source

If your video source has component video ports, you can connect it to the projector using a component-to-VGA video cable. Depending on your component ports, you may need to use an adapter cable along with a component video cable.
  1. Connect the component connectors to your video source's color-coded component video output ports, usually labeled Y, Pb, Pr or Y, Cb, Cr. If you are using an adapter, connect these connectors to your component video cable.
  2. Connect the VGA connector to the projector's Computer port.


    1 Computer1 or Computer2 port

If your image colors appear incorrect, you may need to change the Input Signal setting in the projector's Signal menu.

Related references
Input Signal Settings - Signal Menu