If there is no sound when you expect it or the
volume is too low or high, try the following solutions:
-
Adjust the
projector's volume settings.
-
Press the
A/V Mute button on the remote
control to resume video and audio if they were temporarily
stopped.
-
Press the
Source Search button to switch to
the correct input source, if necessary.
-
Check your
computer or video source to make sure the volume is turned up and
the audio output is set for the correct source.
-
Check the
audio cable connections between the projector and your video
source.
-
Make sure
any connected audio cables are labeled "No Resistance".
-
If you are
using the USB Display function, turn on the Output audio from the projector setting in the
Epson USB Display Settings program on your computer.
-
If
Standby Audio is enabled (PowerLite
935W), the projector's fans may be louder than usual when the
product wakes up from standby mode. The projector's fans should
resume normal noise levels within 2 minutes.