If no image appears, try the following solutions:
-
Make sure
the lens cover is open all the way or off.
-
Press the
A/V Mute button on the remote
control to see if the image was temporarily turned off.
-
Make sure
all necessary cables are securely connected and the power is on for
the projector and connected video sources.
-
If you
connected your video source to the Monitor
Out/Computer2 port, make sure you set the Monitor Out Port setting to Computer2.
-
Press the
projector's power button to wake it from standby or sleep mode.
Also see if your connected computer is in sleep mode or displaying
a blank screen saver.
-
Check the
settings on the Signal menu to make sure they are correct for the
current video source.
-
Adjust the
Brightness setting or select the
Normal Power Consumption
setting.
-
Check the
Display setting to make sure
Messages is set to On.
-
If the
projector does not respond when you press the control panel
buttons, the buttons may be locked. Unlock the buttons.
-
If the
projector does not respond when you press buttons on the remote
control, make sure the remote receivers are turned on.
-
For images
projected with Windows Media Center, reduce the screen size from
full screen mode.
-
For images
projected from applications using Windows DirectX, turn off DirectX
functions.