Turning On the Product

Turn on the computer or video equipment you want to use before you turn on the product so it can display the image source.
  1. Open the projectors' lens covers.


  2. Connect the power cords to the projectors' power inlets.


  3. Plug the power cords into an electrical outlet. The projectors' power lights turn orange. This indicates that the product is receiving power, but is not yet turned on (it is in standby mode).
    Note: With Direct Power On turned on, the product turns on as soon as you plug it in.
  4. Press the power button on the commander projector or the remote control to turn on the product. The projectors beep and the power lights flash green as the product warms up. After about five seconds, the power lights stop flashing and turn green.
    Warning: Never look into the projector lenses when the lamps are on. This can damage your eyes and is especially dangerous for children.
If you do not see a projected image right away, try the following:
  • Verify the lens covers are open all the way.
  • Turn on the connected computer or video device.
  • Insert a DVD or other video media, and press the play button (if necessary).
  • Press the Source Search button on the projector or remote control to detect the video source.
Related references
Projector Setup Settings - Extended Menu