Load a CD/DVD

You can print on any compatible, ink jet-printable CDs or DVDs.

1.	First burn files, music, or video onto your CD/DVD before printing on it to prevent errors.

2.	Turn on the Epson Stylus Photo R3000 Series.

3.	Remove any roll paper or paper loaded in the sheet feeder. Close the rear support if it’s open.

4.	Open the front cover, then push the center of the manual feed tray to extend it.

5.	Place your disc on the included CD/DVD tray with the label side up.

Note:
For small 8-cm discs, place the adapter on the tray and then place the disc in the adapter.

6.	Place the CD/DVD tray on the manual feed tray.

7.	Line up the arrows on the CD/DVD tray with the line on the manual feed tray. Make sure the CD/DVD tray is flush against the right.

8.	Press the OK button. The CD/DVD tray loads inside the printer.

Now you can print on the CD/DVD using the Epson Print CD software.

After printing, remove the printed CD/DVD.

Caution:
Do not turn the R3000 Series on or off with a CD or DVD loaded in it. Always remove the disc first.