Reference
Guide
|
|
Product Information / Printer Specifications
System Requirements
For Windows
To use your printer and its software, your system should have:
- An IBM® compatible PC with at least a Pentium® processor (for Windows 98), a Pentium 150 MHz processor (for Windows Me), or a Pentium 133 MHz processor (for Windows 2000)
- Microsoft Windows 98, Window Millenium Edition (Me), or Windows 2000
- RAM of at least 20MB (for Windows 98), or 32MB (for Windows Me), or 64MB (for Windows 2000) [50MB for Windows 98, or 64MB for Windows Me or 2000 recommended]
- At least 50MB of free hard disk space (100MB recommended)
- VGA or better display adapter and monitor
- Double-speed (2x) CD-ROM drive (quad-speed [4x] or faster recommended) or DVD drive for installing the printer software
- For USB connection: a computer running Windows 98, Windows Me, or Windows 2000 with a Windows-compliant USB port and a shielded USB “AB” cable from Series A (computer) to Series B (printer), up to 6.5 ft. (2 meters) long.
|
Caution:
|
|
Using an improperly shielded USB cable—especially a cable more than 6.5 ft. (2 meters) long—may cause the printer to malfunction.
|
For Macintosh
To use your printer and its software, your system should have:
- An Apple® iMacTM series, Power Macintosh® G3, or G4 with native USB port
- Mac® OS 8.5.1 to 9.1
|
Note:
|
|
If your iMac is running OS 8.1, you’ll need to upgrade your operating system before installing your printer software. If your iMac is running OS 8.5.1, Apple recommends that you install iMac Update 1.1, available on the Apple web site. To find out which operating system your iMac is running, select About This Computer from the Apple menu.
|
- At least 16MB of available RAM (32MB recommended)
- At least 50MB of free hard disk space (100MB recommended)
- VGA or better display adapter and monitor
- Double-speed (2x) CD-ROM drive (quad-speed [4x] or faster recommended) or DVD drive for installing the printer software
- A shielded USB “AB” cable from Series A (computer) to Series B (printer), up to 6.5 ft. (2 meters) long
|
Caution:
|
|
Using an improperly shielded USB cable—especially a cable more than 6.5 ft. (2 meters) long—may cause the printer to malfunction.
|
[Top]
Copyright © SEIKO EPSON CORPORATION 2000, ALL RIGHTS RESERVED |