|
•
|
Run a printer check. If the test page prints, make sure your software is installed correctly.
|
Windows 7:
Click
and select Devices and Printers. Then right-click EPSON WorkForce 1100 Series, select See what’s printing, right-click the stalled print job, and click Cancel and then Yes.
Click
and select Devices and Printers. Then right-click EPSON WorkForce 1100 Series, select See what’s printing, right-click the stalled print job, and click Cancel and then Yes.Windows Vista:
Click
, select Control Panel, and click Printer under Hardware and Sound. Then right-click EPSON WorkForce 1100 Series, select Open, right-click the stalled print job, and click Cancel and then Yes.
Click
, select Control Panel, and click Printer under Hardware and Sound. Then right-click EPSON WorkForce 1100 Series, select Open, right-click the stalled print job, and click Cancel and then Yes.Windows XP:
Click Start and select Printers and Faxes. (Or open the Control Panel, select Printers and Other Hardware if necessary, and then Printers and Faxes). Then right-click EPSON WorkForce 1100 Series, select Open, right-click the stalled print job, and click Cancel and then Yes.
Click Start and select Printers and Faxes. (Or open the Control Panel, select Printers and Other Hardware if necessary, and then Printers and Faxes). Then right-click EPSON WorkForce 1100 Series, select Open, right-click the stalled print job, and click Cancel and then Yes.
Windows 2000:
Click Start, point to Settings, and select Printers. Then right-click EPSON WorkForce 1100 Series, select Open, right-click the stalled print job, and click Cancel and then Yes.
Click Start, point to Settings, and select Printers. Then right-click EPSON WorkForce 1100 Series, select Open, right-click the stalled print job, and click Cancel and then Yes.
Note:
If you print continuously for a long period of time, the paper may temporarily stop feeding or the print head may temporarily stop moving in order to slow down the printing speed and prevent the printer mechanism from overheating and being damaged. If this happens, you can continue to print, but Epson recommends that you stop and leave the printer on for about 30 minutes. After 30 minutes, turn the printer off and on and it should print at normal speed.
If you print continuously for a long period of time, the paper may temporarily stop feeding or the print head may temporarily stop moving in order to slow down the printing speed and prevent the printer mechanism from overheating and being damaged. If this happens, you can continue to print, but Epson recommends that you stop and leave the printer on for about 30 minutes. After 30 minutes, turn the printer off and on and it should print at normal speed.
|
•
|
Check to see if the print head nozzles are clogged.
|
|
•
|
The printer won’t operate properly if it’s tilted or at an angle. Place it on a flat, stable surface that extends beyond the base in all directions.
|
Try restarting your computer. If you still don’t see the 
icon, follow these steps:
icon, follow these steps:
and select 
, select Windows XP:
Click Start and select Printers and Faxes. (Or open the Control Panel, select Printers and Other Hardware if necessary, and then Printers and Faxes).
Click Start and select Printers and Faxes. (Or open the Control Panel, select Printers and Other Hardware if necessary, and then Printers and Faxes).
|
2.
|
|
3.
|
Click the Maintenance tab.
|
|
4.
|
|
5.
|
Make sure your system meets the requirements. If you’re printing a high-resolution image, you need more than the minimum requirements listed. You may also need to:
|
•
|
Choose the Black/Grayscale option in your printer settings if your document doesn’t include color.
|
|
•
|
For Windows, choose Draft for the Quality Option.
|
|
•
|
|
•
|
Make sure Quiet Mode is not selected.
|
|
•
|
Make sure the paper Type or Media Type setting matches the paper you loaded.
|
|
•
|
Click the Speed & Progress button in the Maintenance tab of the printer settings window and activate the following settings: High Speed Copies, Always spool RAW datatype, Page Rendering Mode, and Print as Bitmap. (For more information on each of these settings, click Help in the Speed & Progress window.)
|
Note:
If you print continuously for a long period of time, the paper may temporarily stop feeding or the print head may temporarily stop moving in order to slow down the printing speed and prevent the printer mechanism from overheating and being damaged. If this happens, you can continue to print, but Epson recommends that you stop and leave the printer on for about 30 minutes. After 30 minutes, turn the printer off and on and it should print at normal speed.
If you print continuously for a long period of time, the paper may temporarily stop feeding or the print head may temporarily stop moving in order to slow down the printing speed and prevent the printer mechanism from overheating and being damaged. If this happens, you can continue to print, but Epson recommends that you stop and leave the printer on for about 30 minutes. After 30 minutes, turn the printer off and on and it should print at normal speed.
If you’re printing on plain paper with Normal selected for the Print Quality setting, the printer prints at high speed. If you want to make the printing quieter, select the Quiet Mode setting. This slows the print speed.