You can copy
both sides of an ID card on one sheet of paper.
Load plain paper in one of these sizes: Letter (8.5 × 11 inches
[216 × 279 mm]) or A4
(8.3 × 11.7 inches
[210 × 297 mm]).
Note: Load
only the recommended number of sheets.
Press the Copy button. You see
this screen:
To print more than one copy, press the up or down arrow
buttons to select the number (up to 99).
Press the Menu button, press the up or
down arrow buttons to select Layout, and press the OK
button.
Press the up or down arrow buttons to select ID Card Copy and press the OK
button.
To change the paper size setting, press the up or down
arrow buttons to select Paper
Size, press the OK button, press the up or down arrow
buttons to select your paper size, and press the OK button
again.
When you are ready to copy, press one of the Start buttons. You see
instructions on the LCD screen.
Place your ID card facedown on the scanner
glass.
Press the same Start button again. Your
product scans the front side of the card.
When your product finishes scanning the front side, turn
the card over, then press the same Start button again. Your
product scans the back side of the card and then begins printing.
Note: To
cancel printing, press the Stop/Reset button.