If you have problems with document jams in the
automatic document feeder (ADF), try these solutions:
- Remove your
originals from the ADF.
- Open the ADF
cover.
- Remove any
jammed paper.
1 |
ADF cover |
2 |
Paper feeder |
Caution:
Do not remove paper jammed inside the ADF
without opening the cover or you could damage the ADF.
- Leave the
ADF cover open, then lift the paper feeder.
1 |
ADF cover |
2 |
Paper feeder |
- Remove any
jammed paper or torn pieces.
- Lower the
paper feeder (but don't close the ADF cover).
- Raise the
ADF input tray.
- Carefully
remove any jammed paper.
- Lower the
ADF input tray and reload your originals.
Caution:
Make sure you do not load the ADF beyond
its capacity for your paper size. Also make sure the originals you
load are not bent, folded, or curled and do not have tape, staples,
or other materials that could obstruct the feeder.
- Follow the
prompts on the LCD screen to clear any error messages.