Copying ID Cards

You can copy both sides of an ID card on one sheet of paper.
  1. Load plain paper in one of these sizes: Letter (8.5 × 11 inches [216 × 279 mm]) or A4 (8.3 × 11.7 inches [210 × 297 mm]).
    Note: Load only the recommended number of sheets.
  2. Press the  Copy button. You see this screen:


  3. To print more than one copy, press the up or down arrow buttons to select the number (up to 99).
  4. Press the  Menu button, press the up or down arrow buttons to select ID Card Copy, and press the OK button.
  5. Press the up or down arrow buttons to select your paper size, and press the OK button again.
  6. When you are ready to copy, press one of the  Start buttons. You see instructions on the LCD screen. Press the OK button to see how to place your card.
  7. Place your ID card facedown on the scanner glass.
  8. Press the same  Start button again. Your product scans the front side of the card.
  9. When your product finishes scanning the front side, turn the card over, then press the same  Start button again. Your product scans the back side of the card and then begins printing.
    Note: To cancel printing, press the  Stop/Reset button.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use