Fax Communications Options

Set the communication options you want to use for faxing over your phone line.

Setting Options Description
DRD All If you are using a Distinctive Ring Service on your phone line, your telephone company can assign two or more phone numbers to the same line and assign different ring patterns to each. If you use this service, select the number of rings for your fax number as the DRD setting so your product can receive faxes on the correct number of rings. All is the default setting and works for phone lines that do not use this service.
Single
Double
Triple
Double&Triple
ECM On Turns on Error Correction Mode (ECM) to automatically request retransmission of faxes received with detected errors (default setting).
Off Turns off Error Correction Mode (ECM).
Fax Speed Fast(33,600bps) Transmits faxes at 33.6 Kbps (default setting)
Medium(14,400bps) Transmits faxes at 14.4 Kbps
Slow(9,600bps) Transmits faxes at 9.6 Kbps
Rings to Answer 1 to 9 Sets the number of rings before your product receives a fax. The default setting is 4. If Auto Answer is turned on and an answering machine is connected to the product, make sure this setting is set higher than the number of rings your answering machine is set to answer a call.
Dial Tone Detection On Automatically dials the phone number you enter to send a fax when the product detects a dial tone on the line.
Off Turns off automatic dial tone detection. This is necessary if you connected your product to a phone line on a Private Branch Exchange (PBX) or Terminal Adapter (TA) system.
Header Fax Header Lets you set up the header information for outgoing faxes.
Your Phone Number
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use