You can
select or change wireless network settings using your product
control panel.
To install your product on a wireless network, follow the instructions on the Start Here sheet and install the necessary software from the product CD. The installer program guides you through network setup.
- Press the
Wi-Fi
Setup button. You see this screen:
- Press the OK button to select Wi-Fi Setup Wizard.
- Press the up or down arrow buttons to select the name of
your wireless network and press the OK button. If you do not see your
wireless network's name, you can enter it manually.
Note: To enter the wireless network name manually, select Other SSIDs and press the OK button. Enter your network name as described in the next step.
- Enter your wireless password (or network name and then
password).
- Press the arrow buttons to highlight a character or a function button displayed on the keypad. Then press the OK button to select it.
- To change the case of letters, select AB12 (uppercase), ab12 (lowercase) and press the OK button.
- To select a symbol, select Symbol and press the OK button. Then highlight a symbol and press the OK button to select it.
- To enter a space, select Space and press the OK button.
- To delete characters, select the back arrow and press the OK button.
- When you finish entering characters, select Done and press the OK button.
- Press the OK button to confirm Wi-Fi settings.
- Select Yes if you want
to print a network status report, or No if not, and press the OK button. The
WiFi light should now be on, but not
flashing.
Note: If the WiFi light is off, you may have selected the wrong network name or entered the password incorrectly. Repeat these steps to try again.
