print documents on a variety of paper types and sizes.
Flip the feeder guard forward.
Raise the paper support and its extension, pull out the
output tray, then raise the paper stopper.
Slide the edge guide to the left.
Insert paper, glossy or printable side up and short edge
first, against the right side. If you are inserting a stack of
paper, fan the sheets first and tap the stack on a flat surface to
even the edges.
Slide the edge guide against the paper, but not too
Flip the feeder guard back.
these paper loading guidelines:
Load only the
recommended number of sheets.
Load paper short
edge first, no matter which way your document faces.
or pre-printed paper top edge first.
Do not load paper
above the arrow mark inside the edge guide.
Check the paper
package for any additional loading instructions.
If you use paper
with binder holes, load only one sheet at a time and use only these
sizes: Letter (8.5 × 11 inches
[216 × 279 mm]), A4
(8.3 × 11.7 inches [210 × 297 mm]),
or Legal (8.5 × 14 inches
[216 × 357 mm]).